The combination of fiber sheet material, FRP (Fiber Reinforced Polymer), and laminate is a key aspect of modern material science and engineering. These composite materials are widely used in various industries due to their lightweight, high strength, and corrosion resistance. In a nutshell, fiber sheet material provides a flexible and durable base, FRP adds strength and stiffness through the use of fibers embedded in a polymer matrix, and laminate enhances surface finish and aesthetics. For example, FRP laminates are extensively used in construction, automotive, aerospace, and marine applications. They offer superior mechanical properties and design flexibility, making them an ideal choice for structural components and decorative elements. In summary, the combination of these materials results in a versatile and reliable solution for a wide range of engineering challenges.
纤维片材,FRP laminate
1)FRP laminate纤维片材
1.Studies on construction technologies of strengthening concrete beams prestressed withFRP laminates;纤维片材预应力加固混凝土梁施工技术研究
2.Nonlinear analysis of RC beams strengthened by bonding prestressedFRP laminate;粘贴预应力纤维片材加固混凝土梁截面非线性分析
英文短句/例句
1.Bond Performance Between Carbon Fiber Reinforced Polymer and Steel Fiber Reinforced Concrete碳纤维片材与钢纤维混凝土粘结性能
2.The Finite Element Analysis Research on Steel Structures with CFRP;碳纤维片材加固钢结构的有限元分析
3.The Reinforced Concrete Structure Strengthened with CFRP;碳纤维片材(加锚)加固钢筋混凝土结构
4.Research on the Application of the Reinforced Bridge Structures with Carbon Fiber Sheet;碳纤维片材在桥梁加固中的应用研究
5.EXPERIMENTAL STUDY ON FLEXURAL BEHAVIORS OF PBO FIBER PLATE REINFORCED CONCRETEPBO纤维片材加固混凝土弯曲性能研究
6.Flexural Behavior of Concrete Beams Strengthened with Prestressed FRP Laminate;预应力纤维片材加固混凝土梁抗弯性能研究
7.Research on Strength of RC Beams with Externally Bonded FRP Sheets under Debonding Failure Modes;纤维片材加固钢筋混凝土梁的剥离承载力研究
8.The Application Study in Strengthening Concrete Structures with Carbon Fiber Reinforced Polymer Laminate;碳纤维片材加固钢筋混凝土结构的应用研究
9.Mechanical Behavior Analysis on Reinforced Concrete Beams Strengthened with FRP Laminates;粘贴纤维片材的钢筋混凝土梁力学行为分析
10.Testing Research on Performance of Strengthening Concrete Column with Carbon Fiber Sheet;冻融条件下碳纤维片材加固混凝土柱性能研究
11.The Application Study in Strengthen Concrete Structures with Carbon Fiber Reinforced Polymer Laminate碳纤维片材加固混凝土结构的应用研究
12.BOND PERFORMANCE BETWEEN GLASS FIBER REINFORCED POLYMER AND CONCRETE玻璃纤维片材与混凝土粘结性能试验研究
13.Research Status of Structure of Prestressed CFRP Reinforcement Projects预应力碳纤维片材加固工程结构的研究现状
14.Analysis on bending failure of concrete beam reinforced with aramid fiber sheet芳纶纤维片材加固混凝土梁的弯曲破坏分析
15.Analysis of bond extremities" interfacial stress of prestressed CFRP laminate after releasing预应力碳纤维片材张放后端部粘结应力分析
16.Application of Carbon Fiber in Strengthening Reinforced Concrete Structure碳纤维片材在钢筋混凝土结构加固中的应用
17.Calculation and Analysis on Flexural Strengthening with CFRP Laminate Considering the Preexisting Strain考虑残余应变的碳纤维片材抗弯加固计算分析
18.Study Summary of RC Flexural Members Bonded by Pre-tensioned FRP Sheet预应力纤维片材加固RC构件受弯研究现状
相关短句/例句
fiber sheets纤维片材
1.The results show that the maximum load of CFRP-cement and AFRP-cement increases obviously after carbon and aramidfiber sheets were modified by plasma.利用三点弯研究了水泥砂浆外贴碳纤维和芳纶纤维片材后的抗弯性能,并对2种纤维进行表面处理,探讨纤维的表面处理对FRP水泥砂浆体系抗弯性能的影响。
2.The flexural properties of cement mortar externally bonded carbonfiber sheets under different moisture and heat environment were studied by means of three|point bending test.利用三点弯曲试验研究了水泥砂浆外贴碳纤维片材后在不同湿热条件下的抗弯性能 ,考察了CFRP 水泥砂浆的破坏模式 ,探讨了湿热对CFRP 水泥砂浆抗弯性能的影响机理。
3)fiber sheet纤维片材
1.The surfaces of carbonfiber sheet and aramidfiber sheet were modified respectively by using of nitric acid, coupling agent and plasma.分别对碳纤维和芳纶纤维进行表面处理,并利用三点弯曲梁试验来研究水泥砂浆外贴该两种纤维片材后的抗弯性能。
4)Fiber laminate纤维片材
1.After test, the shear walls were strengthened with the replacement of concrete and the bond of fiber laminates together based on the failure modes of walls.首先进行了4片钢筋混凝土剪力墙的低周反复加载试验,根据试件的破坏形态,采用置换混凝土和粘贴纤维片材联合加固方法进行加固。
5)carbon fiber sheet碳纤维片材
1.A discussion about skill rules of strengthening reinforced concretes withcarbon fiber sheet;碳纤维片材加固混凝土结构技术规程应用探讨
2.The reinforcing construction technology of tunnel lining structure withcarbon fiber sheet;碳纤维片材加固隧道衬砌结构的施工技术
3.The external prestress reinforcement technology withcarbon fiber sheet was discussed.对现有碳纤维片材加固技术进行了介绍,分析了现有碳纤维片材加固技术的缺陷,就体外预应力碳纤维片材补强加固技术进行了探讨,并证实了体外预应力碳纤维片材补强加固技术是一项值得研究发展的新技术。
6)CFRP碳纤维片材
1.GUI DESIGN OF MOMENT REINFORCING WITHCFRP;碳纤维片材抗弯加固的GUI设计
2.The Efficiency forCFRP Used to Strengthen the Moment Capacity of Bending Section;初弯矩作用下碳纤维片材用于受弯构件正截面加固的有效性分析
3.In case that the axial compressive ratio and seismic property can not meet the requirements of the standard, by use of the reinforcement technique of surface wrappedCFRP, the compressive strength of the con-crete can be increased, hennce to lower the axial compressive ratio and satisfy the requirement of the standard.通过实例对框架柱的轴压比及抗震性能不能满足规范要求的情况下,采用体外粘贴包裹碳纤维片材补强技术,对柱形成有效的约束机制,使混凝土的抗压强度得到提高从而降低柱的轴压比,使原轴压比超限的柱满足规范所规定的要求。
延伸阅读
碳纤维片材分子式:CAS号:性质:指短切碳纤维与纸浆或合成浆粕混合抄纸后,用热变形温度60℃以上的树脂浸渍而得的片材。根据不同树脂的耐热性和碳纤维的不同电阻,在通电后具有不同温区的发热功能,热特性稳定而又节能,可放射5~20μm波长的红外线。制法是将短切聚丙烯腈或沥青碳纤维与纸浆或合成浆粕混合抄纸,再用酚醛、脲醛、聚酯、丙烯腈-丁二烯-苯乙烯共聚物(ABS)、环氧等树脂溶液中的一种浸渍处理而得,可制成柔软薄膜或刚性板片等。用作各种节能发热体等。