Sintering is a process of forming a solid mass of material by heat or pressure without melting it to the point of liquefaction. The term "烧结反应" in Chinese refers to the chemical reaction that occurs during sintering. When translated to English, "烧结反应" becomes "sintering reaction." In the context of materials science and engineering, sintering reactions play a crucial role in the production of ceramics, metals, and composites. Here are some examples of how to use "sintering reaction" in a sentence: 1. The sintering reaction of the ceramic powders results in a dense, strong material. 2. The temperature and atmosphere are important factors in controlling the sintering reaction. 3. Understanding the kinetics of the sintering reaction is essential for optimizing the manufacturing process. By studying these examples, you can gain a better understanding of how "sintering reaction" is used in English sentences.
烧结反应,sintering reaction
1)sintering reaction烧结反应
1.Thesintering reactions were completely studied when two different kinds of additives were introduced into the Sialon system.研究了在 Ｓｉａｌｏｎ系统中分别引入１０％的 Ｓｉｎ－Ｍ’（ｍｅｌｉｌｉｔｅ）和 ＹＡＧ（ｇａｒｎｅｔ）后的烧结反应过程。
2.Thermodynamic calculation shows that the temperature of thesintering reaction is around 800 K(527 ℃),with sodium carbonate as the additive,and the products are mainly NaAlSiO_(4),KAlSiO_(4) and Na_(2)SiO_(3).通过烧结反应实验,得到优化反应温度为800~850℃,霞石正长岩的分解率达95%以上。
英文短句/例句
1.Research of mechanism on sintered bricks made from high volume fly ash;粉煤灰烧结砖原料处理与烧结反应机理的研究
2.Studies on the Sintering Reactions Process of Coal Fly Ash粉煤灰中硅酸盐烧结反应过程的研究
3.Surface Coating Technique of Reaction Bonded SiC Mirrors反应烧结碳化硅反射镜表面改性技术
4.Study on the Friction and Wear Properties of Reaction-Bonded Silicon Carbide;反应烧结SiC陶瓷摩擦磨损性能研究
5.Study on Preparation of High-Strength SiC_W/SiC Composites by Reasction Bonded Method;反应烧结制备高强SiC_W/SiC材料的研究
6.Study on Si_3N_4 Wave-transmitting Material Fabricated by Reaction-sintering;反应烧结Si_3N_4透波材料的研究
7.Preparation and Study of Reaction-Bonded Si_3N_4 Porous Ceramics;反应烧结多孔Si_3N_4陶瓷的制备与研究
8.Research on the Erosion Wear of Reactive Sintering Silicon Carbide;反应烧结SiC陶瓷冲蚀磨损性能研究
9.Freeze Casting of Reaction Bonded Silicon Carbide;反应烧结碳化硅坯体的冷凝浇注成型
10.Reaction sintering of Al_3Ti particulate reinforced Mg matrix compositeAl_3Ti颗粒增强镁基复合材料的反应烧结
11.Preparation of Stoichiometric Boron-Carbon Ceramics by Spark Plasma SinteringSPS反应烧结不同化学计量比硼-碳陶瓷
12.Solid-state reaction synthesis and sintering of 2MgO·TiO_22MgO·TiO_2的固相反应合成与烧结
13.Reaction Behavior of Al_2O_3 and Fe_2O_3 in Na_2O-Al_2O_3-Fe_2O_3 Systems during SinteringNa_2O-Al_2O_3-Fe_2O_3系烧结过程中铝、铁的反应行为
14.Preparation of porous TiB_2-TiC multiphase ceramics by reactive sintering反应烧结制备多孔TiB_2-TiC复相陶瓷
15.Study on the reaction mechanism of Ti_3SiC_2 by melt infiltration sintering method熔渗烧结制备Ti_3SiC_2反应机理的研究
16.Structure and combustion reactivity of coal char pyrolyzed in different atmospheres不同热解气氛煤焦结构及燃烧反应性
17.Effect of reactive sintering temperature on properties of Si_3N_4-SiC refractories反应烧结温度对Si_3N_4-SiC材料性能的影响
18.The Effect of Y_2O_3 on the Properties of Porous Si_3N_4 Ceramic Prepared by Reactive SinteringY_2O_3对反应烧结制备Si_3N_4多孔陶瓷的影响
相关短句/例句
reaction sintering反应烧结
1.Microstructure and properties of Mo_2FeB_2 cermets clad layer byreaction sintering;反应烧结三元硼化物金属陶瓷覆层的组织与性能
2.Densification of laser ignitedreaction sintering of Ni-Al-Cu powder alloy;Ni-Al-Cu粉末合金激光点火反应烧结的致密化研究
3.The samples prepared by general sintering andreaction sintering are investigated by XRD,SEM and other testing means for their structure and performance.采用常规烧结法和反应烧结法烧结制品,并利用XRD和SEM等测试手段对制品的结构与性能进行了分析研究。
3)reactive sintering反应烧结
1.Preparation of cemented carbide having highly oriented WC grains byreactive sintering of W-Co-Nano carbon tubes;W-Co-纳米碳管反应烧结制备高度取向硬质合金
2.Densification behavior duringreactive sintering of compacted Ti/Al composite powders prepared by high energy ball milling;高能球磨Ti/Al复合粉体的反应烧结致密行为
3.Temperature model ofreactive sintering of Ni Al thermal spray layer;Ni-Al喷涂层中温反应烧结的温度变化模型
4)reaction-bonded反应烧结
1.Low density silicon nitride with about 55% porosity and globed macropores was prepared byreaction-bonded raw silicon powder and adding 30% in mass pore-forming agent of benzoic acid ball-like particles.以硅粉为原料,添加质量分数为30%的成孔剂(苯甲酸)球形颗粒,反应烧结制备了气孔率为55%,具有球形宏观孔的低密度多孔氮化硅陶瓷。
2.A near-net-shape SiC was prepared byreaction-bonded from a pure carbon perform which was fabricated by mould from graphite power as raw and phenolic resin as binder.以石墨粉体为原料,酚醛树脂为粘接剂,采用模压成型工艺制备了全碳质素坯,反应烧结后得到S iC材料。
3.The effects of carbon content, moulding pressure, and carbon particle size of green body on microstructure and properties ofreaction-bonded silicon carbide (RBSC) have been investigated.研究了反应烧结碳化硅陶瓷的显微组织和性能与生坯碳含量、成型压力以及碳粉粒度的关系。
5)reaction bonded反应烧结
1.SiC platelets/C preform was infiltrated with liquid silicon to preparereaction bonded silicon carbide(RBSC) materials.以液Si浸渗SiC片晶和C的坯体制备了SiC片晶增韧反应烧结SiC陶瓷材料,讨论了SiC片晶的掺加分数及烧结温度对材料显微结构和力学性能的影响,并比较了所得材料与传统反应烧结材料的力学性能。
2.The high temperature oxidation kinetics of areaction bonded silicon carbide oxided in air at 1 300℃ were investigated.研究了反应烧结碳化硅陶瓷在1300℃空气中的高温氧化行为,结果表明:高温氧化过程中在试样表面出现的非晶态SiO2晶化以及氧化膜起裂,使得该陶瓷氧化曲线遵循对数氧化规律。
3.The relation between microstructure and resistivity ofreaction bonded silicon carbide (RBSiC) is examined.研究了反应烧结碳化硅及随后经１６５０℃和１８００℃除硅处理后，材料的显微组织与电阻率之间的关系。
6)reaction-sintering反应烧结
1.Si3N4-BN composite was prepared by using Si and BN as raw materials under nitrogen gas flow at 1 450℃by thereaction-sintering method.以Si粉和BN粉为原料,Fe2O3为烧结助剂,采用反应烧结法于1450℃氮气气氛下制备了Si3N4-BN复合材料。
2.Thereaction-sintering process and microstructure of mullite-zirconia composites sintered and reacted in-situ were investigated.研究了用锆英石和工业氧化铝合成锆莫来石材料的反应烧结过程和显微结构。
3.Si3N4-BN composites were prepared byreaction-sintering method with Si and BN as raw materials under nitrogen atmosphere at 1450℃.以Si粉和BN粉为原料,采用反应烧结法于1450℃氮气气氛下制备了Si3N4-BN复合材料。
延伸阅读
带式烧结机烧结带式烧结机烧结sintering by sinter strand一种应用最广的铁矿石烧结方法。带式烧结机是钢铁工业的主要烧结设备，它的产量占世界烧结矿的”%。现代带式烧结机的烧结室的断面示于图1。烧结机是由铺设在钢结构上的封闭轨道和在轨道上连续运动的一系列烧结台车组成。首先将从烧结矿中分出的铺底料(10~Zomm)加在台车上，以保护台车算条和减少废气含灰量。然后再将烧结混合料经布料机加到台车上，并保持规定的高度。随之进行抽风点火烧结，随台车前进，烧结过程由料层表面不断向下进行。至机尾，烧结完成，台车翻转将烧结饼倾卸。空台车沿下部轨道运行至烧结机头部，再加料进行点火烧结，如此循环不断。烧结饼经破碎和筛出热返矿后，送冷却机冷却。从料层中抽出的废气经台车下的风箱至集气总管和除尘装置，由抽风机排向烟囱。dalshi shaojieji shaojie带式烧结机烧结(sintering by sinter strand)}馨爵鬓 森币乒、，一，，，，.、一，r，_， 图1现代抽风带式烧结机烧结室断面图带式烧结机由烧结台车、密封装置、钢结构框架和3.om、3.sm、4.om及5.om几种。由于台车处于高温传动装置组成。台车是放置烧结料和进行抽风烧结的下工作，因之不仅要求材质能耐高温、而且要求结构合重要部件。它是由铸钢车体、侧板、算条和滚轮组成(见理减少高温变形的影响。在台车和风箱滑道之间有密图2)。按烧结机大小、台车宽度有1.sm、2.om、2.sm、封装置(水管式密封或弹簧式密封)，对减少漏风和节省电耗有很重要的作用。在机头和机尾的风箱隔板与 ‘卜~一一-一-2500—--，司 创盯一一一下台车之间用重锤连杆式密封。为保证台车在受热膨胀.对胭奎至斋荞至幕筹拜三三三三三尸气润后仍能平稳运转，在机尾卸矿端设置专门的摆动机架 书阳~一一一即一一邵一二一一一.一-期d{丹一去或可水平移动的尾部星轮。烧结台车借助于机头部分 !毛一一一一，。。州泞的传动装置向前运动，传动装置是由电动机、减速机和 卜卜一一一一-—3216—一一一一月’传动大齿轮所组成。(见彩图插页第2、3页) (杨兆祥蔡法率)纂戳磷~图2烧结台车
