“晶胶比+(Fed-Feo)/Fe英语短句+例句大全”是一本汇集了关于晶胶比和铁氧化物比例的英语短句和例句的丰富资料。本书包含了大量关于这一领域的研究成果和实际应用案例，旨在帮助读者更深入地了解晶胶比和铁氧化物比例在不同领域的意义和作用。无论是对于科研工作者还是对于工程技术人员来说，本书都提供了丰富的英语短句和例句，可以帮助他们更好地表达和应用相关领域的知识。无论是想要学习专业知识，还是对晶胶比和铁氧化物比例感兴趣的读者，都能在本书中找到所需的信息和启发。
晶胶比,(Fed-Feo)/Fe
1)(Fed-Feo)/Fe晶胶比
1.6679,n=12), and power function positive correlations between k and(Fed-Feo)/Feo(r=0.6679*,n=12),与晶胶比呈幂指数正相关关系(r=0。
2)proportion of crystal liquid to colloid liquid晶胶比例
3)Colloid crystal胶晶
1.Three-Dimentionally Ordered macroporous titanium-silica mixed oxides were successfully synthesized by using polystyren sphere colloid crystal as the template and the sol of tetraethyl silicate and tetrabutoxy-titane as the filling fluid.以聚苯乙烯微球离心后形成的三维规则排列的胶晶作模板,用钛酸丁酯和正硅酸乙酯分别和水、乙醇等配制成的混合溶胶填充微球之间的间隙,然后原位形成凝胶,最后通过焙烧(<5℃/min;300℃,5h;570℃,5～10h,空气流速1L/min)除去微球得到三维规则排列的大孔钛硅混合氧化物。
2.Three dimensionally ordered macroporous silica was successfully synthesized using latex sphere colloid crystal as template and sol of tetraethyl orthosilicate, water, ethanol and hydrochloric acid as filling fluid.以聚苯乙烯微球离心后形成的三维规则排列的胶晶作模板 ,以正硅酸乙酯、水、乙醇和盐酸等配制的溶胶填充微球间的间隙 ,然后原位形成凝胶 ,最后通过焙烧除去微球得到三维规则排列大孔二氧化硅材料 。
3.Periodic macroporous titanium dioxide were successfully synthesized using PS colloid crystal as templates which were made by centrifuging latex sphere, filling in the voids with sol of terabutoxy_titane, and then transforming into gel in situ and removing latex sphere by calcinations.以聚苯乙烯微球 (LatexSphere)离心后形成的三维规则排列的胶晶 (colloidcrystal)作模板 ,用钛酸丁酯、水、乙醇等配制的溶胶填充微球之间的间隙 ,然后原位形成凝胶 ,最后通过焙烧除去微球得到三维规则排列大孔TiO2 材料 (3DOM)。
4)colloidal crystal胶晶
1.Polystyrenecolloidal crystals were assembled by natural sedimentation,centrifugation and vertical deposition methods.采用自然沉降法、离心法和垂直沉积法组装了聚苯乙烯胶晶。
2.Polystyrenecolloidal crystal films(PCCF) were assembled by vertical deposition method.采用垂直沉积法组装了三维聚苯乙烯胶晶膜,并用其为模板制备了三维有序大孔(3DOM)SiO2膜。
5)cryogel晶胶
1.A novel supermacroporouscryogel with sulfo binding groups used in cation-exchange monolith was prepared by in-situ grafting of 3-allyloxy-2-hydroxy-1-propanesulfonic acid sodium salt (AHPSA) onto the pore surfaces of polyacrylamide-basedcryogel.采用原位接枝法,将3-烯丙氧基-2-羟基-1-丙磺酸钠(AHPSA)接枝到聚丙烯酰胺基晶胶基质孔隙内表面,制备得到了阳离子交换型连续床用的带磺酸基超大孔晶胶介质。
英文短句/例句
1.Failure analysis of die attach adhesive for encapsulation SMT LEDSMT LED封装用固晶胶的失效分析
2.polyester film liquid crystal display panel聚脂胶膜液晶显示板
3.Synthesis and Study of PMMA Colloidal Crystals and Photonic Crystals Film;PMMA胶态晶体及光子晶体的制备与表征
4.TiO_2 microcrystals prepared by the solvothermal crystallization of titania Sol.;溶胶溶剂热晶化法制备纳米TiO_2微晶
5.a crystalline amino acid obtained from gelatin or collagen.从凝胶或胶原质中获得的晶状氨基酸。
6.Synthesis of Tin Oxide Nanocrystals by Sol-Gel Method纳米晶SnO_2合成的溶胶-凝胶制备方法
7.Sol-Gel Synthesis of YAG:Ho~(3+),Yb~(3+) Nanocrystal溶胶-凝胶法制备YAG:Ho~(3+),Yb~(3+)纳米晶
8.POLYCRYSTALLINE YTTRIUM ALUMINUM GARNET FIBERS PREPARED BY SOL–GEL METHOD溶胶–凝胶法制备多晶钇铝石榴石纤维
9.The Gel Mechanism of Nano-TiO_2 Derived by Sol-Gel Method and the Phase Transformation;纳米TiO_2的溶胶－凝胶法的凝胶机理及晶相转化
10.REINFORCEMENT OF NATURAL CELLULOSE WHISKER ON NATURAL RUBBER天然微晶纤维素晶须补强天然橡胶的研究
11.The Preparation and Characteristics of Titania Nanocrystals and Thin Films by Sol-Gel Process;溶胶-凝胶法TiO_2纳米晶与薄膜的制备及表征
12.The Preparation of (Sr, Pb) TiO_3 Nano-powders and PTC Device by Sol-Gel Process;溶胶—凝胶法制备钛酸锶铅纳米晶及PTC器件
13.Synthesis of MgAl_2O_4 Spinel Nannopowder by Sol-gel Process溶胶-凝胶法制备纳米镁铝尖晶石纳米粉
14.Preparation and Characterization of γ-Al_2O_3 Nanocrystals by Hydrothermal Assisted Sol-gel Method水热辅助溶胶-凝胶法制备纳米晶γ-Al_2O_3及表征
15.PREPARATION AND CHARACTERIZATION OF ALUMINA NANOCRYSTALLINE POWDER BY COMPLEXING SOL-GEL METHOD络合溶胶-凝胶法制备Al_2O_3纳米晶及其表征(英文)
16.THERMAL DECOMPOSITION AND CRYSTALLIZATION PROCESS OF ZnO:Al THIN FILMS VIA SOL-GEL ROUTE溶胶-凝胶法制备ZnO:Al薄膜的热分解及晶化过程
17.The inhibition by the crystalloid agents was stronger than that by the colloid agents.晶体溶质的抑制作用大于胶体溶质。
18.a jellied candy coated with sugar crystals.凝成胶状的糖果，外面有一层结晶糖。
相关短句/例句
proportion of crystal liquid to colloid liquid晶胶比例
3)Colloid crystal胶晶
1.Three-Dimentionally Ordered macroporous titanium-silica mixed oxides were successfully synthesized by using polystyren sphere colloid crystal as the template and the sol of tetraethyl silicate and tetrabutoxy-titane as the filling fluid.以聚苯乙烯微球离心后形成的三维规则排列的胶晶作模板,用钛酸丁酯和正硅酸乙酯分别和水、乙醇等配制成的混合溶胶填充微球之间的间隙,然后原位形成凝胶,最后通过焙烧(<5℃/min;300℃,5h;570℃,5～10h,空气流速1L/min)除去微球得到三维规则排列的大孔钛硅混合氧化物。
2.Three dimensionally ordered macroporous silica was successfully synthesized using latex sphere colloid crystal as template and sol of tetraethyl orthosilicate, water, ethanol and hydrochloric acid as filling fluid.以聚苯乙烯微球离心后形成的三维规则排列的胶晶作模板 ,以正硅酸乙酯、水、乙醇和盐酸等配制的溶胶填充微球间的间隙 ,然后原位形成凝胶 ,最后通过焙烧除去微球得到三维规则排列大孔二氧化硅材料 。
3.Periodic macroporous titanium dioxide were successfully synthesized using PS colloid crystal as templates which were made by centrifuging latex sphere, filling in the voids with sol of terabutoxy_titane, and then transforming into gel in situ and removing latex sphere by calcinations.以聚苯乙烯微球 (LatexSphere)离心后形成的三维规则排列的胶晶 (colloidcrystal)作模板 ,用钛酸丁酯、水、乙醇等配制的溶胶填充微球之间的间隙 ,然后原位形成凝胶 ,最后通过焙烧除去微球得到三维规则排列大孔TiO2 材料 (3DOM)。
4)colloidal crystal胶晶
1.Polystyrenecolloidal crystals were assembled by natural sedimentation,centrifugation and vertical deposition methods.采用自然沉降法、离心法和垂直沉积法组装了聚苯乙烯胶晶。
2.Polystyrenecolloidal crystal films(PCCF) were assembled by vertical deposition method.采用垂直沉积法组装了三维聚苯乙烯胶晶膜,并用其为模板制备了三维有序大孔(3DOM)SiO2膜。
5)cryogel晶胶
1.A novel supermacroporouscryogel with sulfo binding groups used in cation-exchange monolith was prepared by in-situ grafting of 3-allyloxy-2-hydroxy-1-propanesulfonic acid sodium salt (AHPSA) onto the pore surfaces of polyacrylamide-basedcryogel.采用原位接枝法,将3-烯丙氧基-2-羟基-1-丙磺酸钠(AHPSA)接枝到聚丙烯酰胺基晶胶基质孔隙内表面,制备得到了阳离子交换型连续床用的带磺酸基超大孔晶胶介质。
6)colloidal crystals胶体晶体
1.Preparation of monodisperse SiO_2 particles for assemblingcolloidal crystals;组装胶体晶体用单分散二氧化硅颗粒的制备
2.Preparation of monodisperse SiO_2 colloidal spheres and the assemble ofcolloidal crystals with high crystalline quality;单分散SiO_2胶体球制备及其胶体晶体组装
3.Fabrication and characterization of silicacolloidal crystals by vertical deposition method;垂直沉积法制备二氧化硅胶体晶体及其表征
延伸阅读
胶态微晶室温磷光法分子式：CAS号：性质：将被分析物制成胶态微晶，在水溶液中形成均匀稳定的分散体系。利用在胶态微晶悬浊液界面上产生的室温磷光(RTP)信号进行定量分析的一种流体室温磷光法。体系可不必除氧，无需使用外部重原子微扰剂。但重现性差，磷光强度与分析物浓度不成直线关系。
